Protoshield Plus MKR STARTER KIT

PROTOSHIELD Plus MKR starter Kit View larger

APSPMKRstarter

New product

This kit is the ideal solution for those who want to start prototyping and experiment with the new ARDUINO MKR family boards, it includes all you need to "plug and play" the MKR WiFi 1010 board.

Combine the versatily of the PROTOSHIELD Plus with the new Arduino MKR family boards.

More details

In Stock

114,90 €

This kit is the ideal solution for those who want to start to prototype and experiment with the new ARDUINO MKR family boards.

Combine the versatily of the PROTOSHIELD Plus with the new Arduino MKR family boards.

A complete kit including all you need to "plug and play" the MKR WiFi 1010 board.

THIS KIT INCLUDES:

  • 1x PROTO SHIELD PLUS board
  • 1x LCD Display Module 1602 16x2 with Yellow backlight
  • 1x Original Arduino MKR WiFi 1010 board
  • 1x MKR2UNO Plus board
  • 2x 8pin stakable headers
  • 1x 10pin stackable header
  • 1x 6pin stackable header
  • 1x 2.5mm DC plug
  • 1x pushbutton
  • USB A to USB MICRO cable
  • 10x Red LEDs 3mm diam.
  • 10x Green LEDs 3mm diam.
  • 10x Yellow LEDs 3mm diam.
  • 10x Blue LEDs 3mm diam.
  • 10x Pushbuttons 5x5mm
  • 10x BC337 NPN Transistors
  • 1x 5V DC Buzzer
  • 1x NTC (Temperature Sensor)
  • 1x LDR (Light Sensor)
  • 10x 220 Ohm Resistors 1/4W
  • 10x 470 Ohm Resistors 1/4W
  • 10x 1K Ohm Resistors 1/4W
  • 10x 4K7 Ohm Resistors 1/4W
  • 10x 10K Ohm Resistors 1/4W
  • 65x Male to Male Solderless Flexible Breadboard Wires

Proto shield plus TECHNICAL SPECIFICATIONS

  • It works with the following ARDUINO / GENUINO boards: UNO, LEONARDO, YÚN, NANO, MICRO, MINI
  • Ready to plug LCD 1602 module
  • I2C PCF8574 I/O expander provided on-board (drive LCD with just 2 pins)
  • 5 Pushbuttons provided on-board
  • Reset button, provided on-board
  • 2 solderless bread-boarding areas 740 contact points each (total 1480 points)
  • More than 400 soldering pads for additional prototyping parts
  • IN / OUT / POWER pins duplicated near the bread-boarding area for easy connection
  • 2 Output LEDs provided on-board
  • 1 potentiometer with knob provided on-board
  • Ready for a servo connection
  • Ready for an external 7-9VDC power supply
  • Ready for an additional ICSP connector to use NANO and MICRO with standard shields
  • Additional holes let you to create shields with standard 2.54mm breadboards (see User Manual §15 for details)
  • Dimensions in mm: 185x205x30 (HxWxH)

MKR2UNO Plus Technical Specification

  • Arduino UNO board form factor.
  • It works with:
    • ARDUINO MKR 1000 WIFI
    • ARDUINO MKR GSM 1400
    • ARDUINO MKR FOX 1200
    • ARDUINO MKR WiFi 1010
    • ARDUINO MKR Vidor 4000
  • On-board bidirectional level shifting (5V <-> 3.3V) on each digital pin
  • On-board clipping voltage at 3.3V on each analog input pin
  • External 7-9VDC power supply
  • RST button, for resetting program
  • Compatible with standard 2.54mm pitch breadboard

MKR WiFi 1010 Technical Specification

  • It's equipped with an ESP32 module made by U-BLOX
  • It aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption
  • SAMD21 Cortex-M0+ 32bit Low Power ARM MCU
  • U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi
  • ECC508 Crypto Authentication
  • It offers ease of use Arduino Software (IDE) for code development and programming
  • It's a perfect choice for the emerging IoT battery-powered projects in a compact form
  • It has a Li-Po charging circuit
  • Switching from 5V to Li-Po source is done automatically
  • It runs at 3.3V but, combined with the MKR2UNO Plus shield, you can usit at 5V just like all others Arduino boards


Click here for more details about the Arduino MKR WiFi 1010 board.


Click here for useful links and more info.


1x MKR2UNO Plus PCB

7 other products in the same category:

Related articles on blog