> > >

BLOG NEWS

USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS
Do you need to work with the good old 16x2 LCD display? Then just plug it into the IoT Proto Shield Plus and you [...]

What does Paolo Aliverti say about the IoT Proto Shield Plus? What does Paolo Aliverti say about the IoT Proto Shield Plus?
Special thanks to Paolo Aliverti (aka Zeppelinmaker) for reviewing the IoT Proto Shield Plus.

USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a small display in your project, just plug an SSD1306 128x32 OLED display module into the IoT Proto [...]

USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a display in your project, just plug an SSD1306 128x64 OLED display module into the IoT Proto Shield [...]

I2C Bus on the IoT Proto Shield Plus I2C Bus on the IoT Proto Shield Plus
I2C is widely used for attaching peripheral ICs to processors and microcontrollers, let's take a look at this bus [...]

See all

Search on blog

Follow us on facebook

Top sellers

Information

Using DAC0 on A0 pin on the MKR2UNO Plus

Published : 05/19/2019 14:24:02
Categories : Proto Shield Plus


Using DAC0 on A0 pin on the MKR2UNO Plus


Arduino MKR family boards lets you to use A0 pin as a “standard” analog input pin or as analog output with 10 bits DAC.

Depending on your application, you may need to bypass the clipping diodes and resistors on A0.

 The MKR2UNO Plus A0 pin
The MKR2UNO Plus A0 pin
 The MKR2UNO Plus MKRA0 jumper
The MKR2UNO Plus MKRA0 jumper
  The MKR2UNO Plus JMKR12 and JMKR11

The MKR2UNO Plus JMKR12 and JMKR11

Share this content

www.gtronicsshop.com

Payment methods