> >Proto Shield Plus STARTER KIT

BLOG NEWS

USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS
Do you need to work with the good old 16x2 LCD display? Then just plug it into the IoT Proto Shield Plus and you [...]

What does Paolo Aliverti say about the IoT Proto Shield Plus? What does Paolo Aliverti say about the IoT Proto Shield Plus?
Special thanks to Paolo Aliverti (aka Zeppelinmaker) for reviewing the IoT Proto Shield Plus.

USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a small display in your project, just plug an SSD1306 128x32 OLED display module into the IoT Proto [...]

USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a display in your project, just plug an SSD1306 128x64 OLED display module into the IoT Proto Shield [...]

I2C Bus on the IoT Proto Shield Plus I2C Bus on the IoT Proto Shield Plus
I2C is widely used for attaching peripheral ICs to processors and microcontrollers, let's take a look at this bus [...]

See all

Search on blog

Follow us on facebook

Top sellers

Information

Proto Shield Plus STARTER KIT

Protoshield Plus View larger
Previous Next

APSPstarter

New product

This kit is the ideal solution for those who want to start to prototype and experiment with ARDUINO / GENUINO.

Prototype with ARDUINO / GENUINO boards without having a lot of wires tangled together.

Swapping from UNO / LEONARDO to NANO, MICRO or MINI is fast and easy.

On-board pushbuttons and LCD header make easy to quickly setup an HMI for your testing environment.

More details

This product is no longer in stock

69,90 €

THE STARTER KIT INCLUDES:

  • 1x PROTO SHIELD PLUS Board
  • 1x UNO R3 board with USB cable
  • 1x LCD Display Module 1602 16x2 with Yellow backlight
  • 10x Red LEDs 3mm diam.
  • 10x Green LEDs 3mm diam.
  • 10x Yellow LEDs 3mm diam.
  • 10x Blue LEDs 3mm diam.
  • 10x Pushbuttons 5x5mm
  • 10x BC337 NPN Transistors
  • 1x 5V DC Buzzer
  • 1x NTC (Temperature Sensor)
  • 1x LDR (Light Sensor)
  • 10x 220 Ohm Resistors 1/4W
  • 10x 470 Ohm Resistors 1/4W
  • 10x 1K Ohm Resistors 1/4W
  • 10x 4K7 Ohm Resistors 1/4W
  • 10x 10K Ohm Resistors 1/4W
  • 65x Male to Male Solderless Flexible Breadboard Wires

TECHNICAL SPECIFICATIONS

  • It works with the following ARDUINO / GENUINO boards: UNO, LEONARDO, YÚN, NANO, MICRO, MINI
  • Ready to plug LCD 1602 module
  • I2C PCF8574 I/O expander provided on-board (drive LCD with just 2 pins)
  • 5 Pushbuttons provided on-board
  • Reset button, provided on-board
  • 2 solderless bread-boarding areas 740 contact points each (total 1480 points)
  • More than 400 soldering pads for additional prototyping parts
  • IN / OUT / POWER pins duplicated near the bread-boarding area for easy connection
  • 2 Output LEDs provided on-board
  • 1 potentiometer with knob provided on-board
  • Ready for a servo connection
  • Ready for an external 7-9VDC power supply
  • Ready for an additional ICSP connector to use NANO and MICRO with standard shields
  • Additional holes let you to create shields with standard 2.54mm breadboards (see User Manual §15 for details)
  • Dimensions in mm: 185x205x30 (HxWxH)

Click here for useful links and more info.

15 other products in the same category:

Customers who bought this product also bought:

Related articles on blog

www.gtronicsshop.com

Payment methods