Electronic Components

BLOG NEWS

USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS
Do you need to work with the good old 16x2 LCD display? Then just plug it into the IoT Proto Shield Plus and you [...]

What does Paolo Aliverti say about the IoT Proto Shield Plus?
Special thanks to Paolo Aliverti (aka Zeppelinmaker) for reviewing the IoT Proto Shield Plus.

USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a small display in your project, just plug an SSD1306 128x32 OLED display module into the IoT Proto [...]

USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a display in your project, just plug an SSD1306 128x64 OLED display module into the IoT Proto Shield [...]

I2C Bus on the IoT Proto Shield Plus
I2C is widely used for attaching peripheral ICs to processors and microcontrollers, let's take a look at this bus [...]

See all

Search on blog

Top sellers

Proto Shield Plus STARTER KIT
This kit is the ideal solution for those who want to start to prototype...
69,90 €
Proto Shield Plus LCD KIT
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
56,00 €
Proto Shield Plus BASE KIT
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
52,00 €
65pcs WIRE KIT
Spare parts to setup your testing environment.
4,50 €

Information

STEPPER MOTOR KIT

View larger

Display all pictures

Send to a friend
Send to a friend

STEPPER MOTOR KIT

NEMA17 stepper motor and TMC2208 driver to experiment and develop your projects. All the items are Plug an Play with the IoT Proto Shield Plus.
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Share on Facebook!
Print

Reference: stepper17KIT

Condition: New product

NEMA17 stepper motor and TMC2208 driver to experiment and develop your projects. All the items are Plug an Play with the IoT Proto Shield Plus.

More details

11 Item Items

In Stock

More info

The Kit includes:

1x NEMA17 stepper motor
1x TMC2208 stepper motor driver

Motor Specifications:
Phase：2
Rated Voltage：DC 3.6V
Phase Resistance(20℃)：2.4*(1±15%)Ω/Phase
Holding Torque：≥420mN.m
Rotating direction：A-C B-D Clockwise
Maximum slewing rate：≥1900 PPS
Electrical strength：AC600V/1mA/1S
Step Angle(degrees)：1.8°±0.09°
Rated Current：DC 1.5A/Phase
Phase Inductance：3.7*(1±20%)mH/Phase
Positioning Torque： 15 mN.m REF.
Maximum starting rate：≥1500 PPS
Insulation resistance：≥100 MΩ (DC 500V)
Insulation class：B