IoT Proto Shield Plus ESP32 STARTER KIT

THIS KIT INCLUDES:

• 1x IoT PROTO SHIELD PLUS Board
• 1x ESP32 D1 MINI board with USB cable
• 1x OLED SSD1303 display 128x64
• 10x Red LEDs 3mm diam.
• 10x Green LEDs 3mm diam.
• 10x Yellow LEDs 3mm diam.
• 10x Blue LEDs 3mm diam.
• 10x Pushbuttons 5x5mm
• 10x BC337 NPN Transistors
• 1x DC Buzzer
• 1x NTC (Temperature Sensor)
• 1x LDR (Light Sensor)
• 10x 220 Ohm Resistors 1/4W
• 10x 470 Ohm Resistors 1/4W
• 10x 1K Ohm Resistors 1/4W
• 10x 4K7 Ohm Resistors 1/4W
• 10x 10K Ohm Resistors 1/4W
• 65x Male to Male Solderless Flexible Breadboard Wires

TECHNICAL SPECIFICATION

It works with:

• Arduino NANO form factor boards
• Arduino NANO 33 IoT
• Arduino NANO 33 BLE
• Arduino Nano RP2040 Connect
• Arduino NANO
• Arduino NANO EVERY
• ESP32 MINI form factor boards
• ESP8266 MINI form factor boards

Features:

• Wide breadboarding area
  • 2x solderless breadboarding areas 740 contact points each (total 1480 points)
• Breakout headers to replicate each I/O pin close to the breadboarding area
• Breakout headers to replicate 3V3, 5V and GND close to the breadboarding area
• Different working voltages:
  • 3V3
  • 5V
  • external power supply by means of an additional LM2596 DC-DC module of widespread use
  • external power supply by means of an additional Battery Shield of widespread use
• Onboard, ready to use, rotary encoder with switch
• Onboard, ready to use, touch sensor switch
• Two onboard, ready to use, OUTPUT LEDs
• Onboard, ready to use, potentiometer with knob
• Onboard speaker to play MP3 files or tones
• Onboard, ready to use, PCF8574 I/O expander to drive 16x2 LCD (I2C communication with LCD with just 2 pins)
• Free soldering pads for additional prototyping parts
• Four onboard, ready to use, level shifter
• RST button, for resetting program
• Plug and Play predisposition for the following modules, sensors and actuators of widespread use:
  • Display LCD 16x2
  • Display OLED SSD1306 128x64
  • Display OLED SSD1306 128x32
  • TM1637 seven-segment display
  • RTC (Real Time Clock)
  • SD Card
  • Servo
  • LDR (Light Dependant Resistor)
  • PTC or NTC (Positive or Negative Temperature Coefficient thermistor)
  • RELAY
  • HC-SR04 (ultrasonic distance sensor)
  • DTH11 / DHT22 module or DHT11 / DHT22 bare sensor (humidity sensor)
  • MAX9814 or MAX4466 module (microphone module)
  • DFR0299 MP3 Mini Player (MP3 file music player)
• Board dimensions in mm: 188x196x30  (HxWxH)