Cart 0 Product Products (empty)
No products
Sign in or proceed with check out to calculate shipping cost
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Sign in or proceed with checkout to calculate shipping cost
BLOG NEWS
USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS 
What does Paolo Aliverti say about the IoT Proto Shield Plus? 
USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS 
USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS 
I2C Bus on the IoT Proto Shield Plus Search on blog
Follow us on facebook
Top sellers
-
Proto Shield Plus STARTER KIT
This kit is the ideal solution for those who want to start to prototype...
69,90 € -
Proto Shield Plus LCD KIT
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
56,00 € -
Proto Shield Plus BASE KIT
Prototype with ARDUINO / GENUINO boards without having a lot of wires...
52,00 € -
New products
-
Uno To IoT Proto Shield Plus Adapter
Use any Arduino UNO comptible board with the IoT Proto Shield Plus.
3,90 €
PicProtoBoard 32 bit SNAP STARTER KIT
PPB32MXsnap
New product
Solderless prototyping board for PIC microcontrollers.
The wide breadboarding area (1480 points) lets you to quickly set-up the desired testing environment.
A set of 65 pcs Male to Male Solderless Flexible Breadboard Wires is provided with the board.
The on-board Output LED, Reference Potentiometer and Pushbutton help for preliminary testing.
3 Items
In Stock
The PicProtoBoard 32 bit starter KIT includes:
- PicProtoBoard
- Original Microchip MPLAB SNAP programmer/debugger + USB cable
- 32MX Adapter complete with PIC32MX130F064D 44PIN TQFP
- 65pcs solderless flexible breadboard wires
- 5x Red LEDs 3mm diam.
- 5x Green LEDs 3mm diam.
- 5x Pushbuttons 5x5mm
- 5x BC337 NPN Transistors
- 1x 10K Potentiometer with Knob
- 1x NTC (Temperature Sensor)
- 1x LDR (Light Sensor)
- 5x 220 Ohm Resistors 1/4W
- 5x 470 Ohm Resistors 1/4W
- 5x 1K Ohm Resistors 1/4W
- 5x 4K7 Ohm Resistors 1/4W
- 5x 10K Ohm Resistors 1/4W
The kit is intended for those who do not own a compatible programmer/debugger
TECHNICAL SPECIFICATIONS
- Wide bread-boarding area (1480 points)
- Debug header for the PIC not needed
- Powered from a free USB port of your PC (external power supply not needed)
- Different PIC Vdd 5V, 3.3V or 1.8V (jumper selectable)
- It works with the PICKIT2, PICKIT3, ICD2, ICD3 and REAL-ICE
- It works with any PIC16F and PIC18F DIP 40 Pin family with pin-out compatible with the PIC16F887 or PIC18F45K20
- It works with any PIC32MX TQFP 44 pin with pinout compatible with the PIC32MX130F64D
- 1x output LED provided on-board
- 1x 10K potentiometer with knob provided on-board
- 1x Pushbutton provided on-board
- Dimension: 180x205x25 mm (HxWxH)
