> >PicProtoBoard 8 bit STARTER KIT

BLOG NEWS

USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS USING A 16x2 LCD DISPLAY WITH THE IoT PROTO SHIELD PLUS
Do you need to work with the good old 16x2 LCD display? Then just plug it into the IoT Proto Shield Plus and you [...]

What does Paolo Aliverti say about the IoT Proto Shield Plus? What does Paolo Aliverti say about the IoT Proto Shield Plus?
Special thanks to Paolo Aliverti (aka Zeppelinmaker) for reviewing the IoT Proto Shield Plus.

USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x32 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a small display in your project, just plug an SSD1306 128x32 OLED display module into the IoT Proto [...]

USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS USING AN SSD1306 128x64 OLED DISPLAY (I2C type) WITH THE IoT PROTO SHIELD PLUS
If you need a display in your project, just plug an SSD1306 128x64 OLED display module into the IoT Proto Shield [...]

I2C Bus on the IoT Proto Shield Plus I2C Bus on the IoT Proto Shield Plus
I2C is widely used for attaching peripheral ICs to processors and microcontrollers, let's take a look at this bus [...]

See all

Search on blog

Follow us on facebook

Top sellers

Information

PicProtoBoard 8 bit STARTER KIT

PicProtoBoard View larger
Previous Next

PPB1xstarter

New product

Solderless prototyping board for PIC microcontrollers.

The wide breadboarding area (1480 points) lets you to quickly set-up the desired testing environment.

A set of 65 pcs Male to Male Solderless Flexible Breadboard Wires is provided with the board.

The on-board Output LED, Reference Potentiometer and Pushbutton help for preliminary testing.

More details

This product is no longer in stock

165,00 €

The PicProtoBoard 8 bit starter KIT includes:

  • PicProtoBoard
  • Original Microchip PICKIT3 + USB cable
  • PIC16F887 40PIN DIP
  • PIC18F45K20 40PIN DIP
  • 65pcs solderless flexible breadboard wires
  • 5x Red LEDs 3mm diam.
  • 5x Green LEDs 3mm diam.
  • 5x Pushbuttons 5x5mm
  • 5x BC337 NPN Transistors
  • 1x 10K Potentiometer with Knob
  • 1x NTC (Temperature Sensor)
  • 1x LDR (Light Sensor)
  • 5x 220 Ohm Resistors 1/4W
  • 5x 470 Ohm Resistors 1/4W
  • 5x 1K Ohm Resistors 1/4W
  • 5x 4K7 Ohm Resistors 1/4W
  • 5x 10K Ohm Resistors 1/4W

The kit is intended for those who do not own a compatible programmer/debugger

TECHNICAL SPECIFICATIONS

  • Wide bread-boarding area (1480 points)
  • Debug header for the PIC not needed
  • Powered from a free USB port of your PC (external power supply not needed)
  • Different PIC Vdd 5V, 3.3V or 1.8V (jumper selectable)
  • It works with the PICKIT2, PICKIT3, ICD2, ICD3 and REAL-ICE
  • It works with any PIC16F and PIC18F DIP 40 Pin family with pin-out compatible with the PIC16F887 or PIC18F45K20
  • It works with any PIC32MX TQFP 44 pin with pinout compatible with the PIC32MX130F64D (additional 32MX Adapter is required)
  • 1x output LED provided on-board
  • 1x 10K potentiometer with knob provided on-board
  • 1x Pushbutton provided on-board
  • Dimension: 180x205x25 mm (HxWxH)

10 other products in the same category:

Customers who bought this product also bought:

www.gtronicsshop.com

Payment methods